Inserting The Usb Dongle - Bandai Namco Time Crisis 5 Operation Manual

8A. Service
- Must be performed by a technician -
8A-5 Inserting the USB Dongle
● In order to avoid electric shock, accident or injury to yourself or others as well as damage to the
78
* This section explains how to remove and install the USB dongle on the 1P side (L side). Repeat the same
procedure performed for the 1P side (L side) to remove and install the USB dongle on the 2P side (R
side).
electronic circuits, be sure to turn off the power switch before starting this task.
● The supplied USB dongles are designed for this machine only. Do not use them for a
machine other than the specified game machine.
● Do not insert any USB dongles other than those designed for this machine. Doing so may
result in mechanical malfunction.
● Be sure to turn off the main power switches before inserting the USB dongles.
● Be sure to install one USB dongle to each game PC board.
1
Check that the power switch is turned off. (See P-39 "7-6-1 Turning the Power Switch ON".)
2
Remove the maintenance door. (See P-65 "8A-2 Assembling the Front Assembly".)
3
Insert the USB dongle, which is provided separately, into USB slot "USB 1" located near the
center of the game PC board.
4
Insert the power cable into the game PC board.
5
Attach the maintenance door.
6
Repeat the procedure on the 2P side (R side).
WARNING
Power cable
Game PC board
"USB 1" slot
USB dongle