Bandai Namco Time Crisis 5 Operation Manual page 96

8B. Service
- Must be performed by a technician -
(3) Replacing the hard disk
● In order to avoid electric shock, accident or injury to yourself or others as well as damage to the
96
* This section explains the procedure applicable to the monitor tower (L) assembly. Repeat the procedure
for the monitor tower (R) assembly.
● This must be performed by a technician.
● Take antistatic measures during installation. Static electricity causes the machine to
malfunction or be damaged.
● Never use a tester or other devices to perform a continuity inspection. The internal voltage
of the tester may damage the ICs in the game PC board, which may cause them to
function incorrectly.
electronic circuits, be sure to turn off the power switch before starting this task.
1
Turn off the power switch.
(See P-81 "8A-8 Turning the Power Switch On".)
2
Remove the game PC board.
(See P-93 "(2) Replacing the game PC board".)
3
Turn the game PC board on its side, remove the Phillips pan head screw (with flat and spring
washers) (M3 x 6) and remove the HDD hatch.
* Be sure not to lose the removed HDD hatch and to reinstall it after replacing the HDD.
4
Disconnect the connector and replace the hard disk.
5
To install, perform the procedure in reverse.
WARNING
Phillips pan head screw
(with flat and spring washers) (M3 x 6)
HDD hatch
Hard disk drive
Game PC board
Connector
Game PC board