(2) LED TEST
This screen is used to test whether light is emitted from LEDs.
1
Item
(a) ALL
(b) SPEAKER LED
(c) TOWER LED
2
3
In the I/O TEST screen, select LED TEST using the Select switch and press the Enter switch.
The LED TEST screen appears.
LED TEST screen
Turn this ON to light up all LEDs.
Turn this ON to light up the speaker LED.
Turn this ON to light up the tower LED.
Select an item using the Select switch and press the Enter switch to toggle ON/OFF the LED.
Press the Enter switch once to turn the LED ON, and press it again to turn the LED OFF.
Select EXIT and press the Enter switch to return to the I/O TEST screen.
Description
7. Operation
1
2
3
4
5
6
7
8A
8B
9
10
11
51