Bandai Namco Time Crisis 5 Operation Manual page 72

8A. Service
- Must be performed by a technician -
Torx bolts (M5 x 12)
Protrusion
Monitor tower (L) assembly
72
19 Remove the two rope hooks from the monitor tower (L) assembly by removing the two
Torx bolts (M5 x 12). Attach the removed hooks to the rear inner side face of the assembly.
Repeat the procedure for the rope hooks on the monitor tower (R) assembly.
Torx bolt (M5 x 12)
Rope hook
Rope hooks
20
Put the signboard (L) assembly on the rear side of the monitor tower (L) assembly by
inserting its protrusion into the opening. When doing so, exercise care not to let the
connector get caught in it.
Monitor tower (L) assembly
(top)
Signboard (L) assembly
Front
Installation completed
Torx bolt (M5 x 12)
Rope hook
Monitor tower (L) assembly
(back)
Connector