Bandai Namco Time Crisis 5 Operation Manual page 50

7. Operation
(1) SWITCH TEST
Item
(a) COIN
(b) SERVICE SW
(c) TEST SW
(d) UP SELECT SW
(e) DOWN SELECT SW
(f) ENTER SW
(g) GUN TRIGGER
(h) GUN BUTTON
(i) LEFT PEDAL
(j) RIGHT PEDAL
(k) SENSOR
50
This screen is used to test each switch and control.
1
In the I/O TEST screen, select SWITCH TEST using the Select switch and press the Enter
switch.
The SWITCH TEST screen appears.
SWITCH TEST screen
Adds "1" each time a coin is inserted. When the count exceeds 999 it returns to 0.
Coin counter is also activated.
Displays ON while the Service switch is held down.
Displays ON while the Test switch is turned ON.
When this screen is accessed in Test mode, (d) TEST SW is automatically turned ON.
Displays ON while the Select switch is flipped up.
Displays ON while the Select switch is flipped down.
Displays ON while the Enter switch is held down.
Displays ON while the Gun trigger is pulled.
Displays ON while the gun button is held down.
Displays ON while the left pedal is pressed down.
Displays ON while the right pedal is pressed down.
Displays OFF while the gun sensor is pointing outside the screen, or ON when the gun
is detected.
2
The display is changed when you operate each switch.
3
Hold the Select switch flipped up and press the Enter switch to return to the I/O TEST screen.
Description