Bandai Namco Time Crisis 5 Operation Manual page 115

(2) Replacing the light-emitting unit
● Replacing the light-emitting unit requires standing at an elevated height. Prepare an appropriate
footstool and exercise care when working. Working in an unnatural body posture may result in injury or
machine damage.
● Replacement of light-emitting unit must be performed by two or more people.
● In order to avoid electric shock, accident or injury to yourself or others as well as damage to the
electronic circuits, be sure to turn off the power switch before starting this task.
1
Turn off the power switch.
(See P-81 "8A-8 Turning the Power Switch On".)
2
Remove the signboard (C) assembly.
(See  through  in P-65 "8A-2 Assembling the Front Assembly".)
3 Remove the six Torx bolts (M5 x 12) and remove the signboard cover (C).
Torx bolts (M5 x 12)
Signboard (C) assembly
- Must be performed by a technician -
WARNING
8B. Service
Signboard cover (C)
115
1
2
3
4
5
6
7
8A
8B
9
10
11