Bandai Namco Time Crisis 5 Operation Manual page 123

4 Pull up the connector cover and wire bracket and remove the gun assembly.
Connector cover
Wire lock
Gun tower (L) assembly
5
To install, perform the procedure in reverse.
6 After replacing the gun assembly, be sure to check the operations. (See P-49 "7-7-5 Input/
Output Test of Switches (I/O TEST)", P-47 "(1) SIGHT CALIBRATION (Gun Sight Calibration
Screen)".)
● When installing it, be sure to securely lock the connectors.
● When installing it, take care not to allow the connectors and harnesses to get caught.
8B. Service
- Must be performed by a technician -
Gun assembly
1
2
3
4
5
6
7
8A
8B
9
10
11
123