Bandai Namco Time Crisis 5 Operation Manual page 76

8A. Service
- Must be performed by a technician -
Gun tower (L) assembly (front)
76
5
Use four flange sockets (M6 x 12) to temporarily secure the pedal assembly to the gun tower
(L). When doing so, be sure to press the pedal assembly against the floor so that it is not
lifted off the floor. (These bolts are fully tightened after level adjuster adjustment.)
Pedal bracket (A)
(Slot)
Flange socket bolts (M6 x 12) (temporarily tighten)
6 Repeat the procedure to attach the pedal brackets (A) and (B), the pedal assembly, and the
gun tower (R) assembly to the monitor tower (R) assembly.
7
Adjust the height of the gun tower (L) and (R) assemblies using the level adjusters, and
tighten the screws that have been tightened temporarily in steps 2 and 5. (See P-77 "8A-4
Level Adjuster Adjustment".)
Flange socket bolts (M6 x 12) (temporarily tighten)
(Slot)
Pedal bracket (B)
Pedal assembly