Bandai Namco Time Crisis 5 Operation Manual page 128

8B. Service
- Must be performed by a technician -
Low head cap screws (M4 x 6)
128
4
Point the gun to the right, disconnect the connector, and remove the vibration unit.
5
Remove the two Phillips pan head screws (with flat and spring washers) (M4 x 6) and
remove the stopper bracket.
6
Remove the two low head cap screws (M4 x 6) and disassemble the vibration unit.
Phillips pan head screws (with flat and spring washers) (M4 x 6)
Vibration unit
Vibration unit
7
Remove the two Phillips pan head screws (with flat and spring washers) (M3 x 10) and
remove the bracket.
Stopper bracket
Rotary solenoid
Connector
Phillips pan head screws
(with flat and spring washers) (M3 x 10)