8B. Service
- Must be performed by a technician -
(3) Replacing the tape LED
● In order to avoid electric shock, accident or injury to yourself or others as well as damage to the
120
* This section explains the procedure applicable to the gun tower (L) assembly. Repeat the procedure for
the gun tower (R) assembly.
electronic circuits, be sure to turn off the power switch before starting this task.
1
Turn off the power switch.
(See P-81 "8A-8 Turning the Power Switch On".)
2
Remove the three Torx bolts (M5 x 12) and remove the side LED retainer.
Gun tower (L) assembly
WARNING
Torx bolts (M5 x 12)
Tower LED light retainer (L)