Bandai Namco Time Crisis 5 Operation Manual page 114

8B. Service
- Must be performed by a technician -
Clamp
114
4
Disconnect the connector, open the six clamps, then remove and replace the tape LED (red).
Tape LED (red)
5
To install, perform the procedure in reverse.
● When installing, be sure to securely lock the connectors.
● When installing, take care not to allow the connectors and harnesses to get caught.
● The color of the LED is red on the L side and blue on the R side.
Connector
Signboard (L) assembly
Clamps