Technician's Manual - Must Be Performed By A Technician; Installation And Assembly; Disassembly; 1-1 Removing The Signboard Assembly - Must Be Performed By A Technician - Bandai Namco MAXIMUM TUNE 5DX PLUS Operation Manual

8. Technician's Manual
8A. Installation and Assembly
z Install the machine according to the instructions in this Operation Manual. Failure to follow these z
instructions may result in fire, electric shock, injury or malfunction.
z Fully insert the power cord plug into the outlet. Poor contact may generate heat and result in fire or z
burns.
z be sure to install the ground wire. Failure to install the ground wire may result in electric shock in z
the event of electrical leakage. (See "8A-3 Connecting the power Cord and Ground" on page 82.)
z Install the machine securely by using the level adjusters. Unstable machine installation may result
z
in an accident or injury.(See "8A-2 level Adjuster Adjustment" on page 81.)
8A-1 Disassembly
8A-1-1 removing the Signboard Assembly
z The signboard assembly weighs approximately 15 kg. To prevent accidents when removing the
z
signboard assembly, use two or more people and secure sufficient work space.
76
WMT5DX取扱説明書_EN.indb 76
1
remove the four Torx bolts (M5 x 12), and remove the two pillar covers.
Torx bolt (M5 x 12)
2
remove the service door. (See "8B-3-2 (1) removing and Installing the Service Door" on page
106.)
- Must be performed by a technician -
- Must be performed by a technician -
Pillar cover
Slide toward the inside
and remove.
16/03/22 19:54