Removing, Installing And Replacing Assemblies And Parts; 3-1 Underbox Assembly - Must Be Performed By A Technician; Replacing The Coin Selector - Bandai Namco MAXIMUM TUNE 5DX PLUS Operation Manual

8b-3 removing, Installing and replacing Assemblies and
parts
8b-3-1 Underbox Assembly
(1)
WMT5DX取扱説明書_EN.indb 103

replacing the Coin Selector

z To avoid electric shock, accidents or injuries to yourself or other people, or damage to the electronic
z
circuits, be sure to turn off the power switch before starting work.
1
Turn off the power switch. (See "7-6-1 Turning the power Switch On" on page 31.)
2
Use the supplied service key to open the service door. (See "7-5 Opening and Closing the Service
Door" on page 30.)
3
pull the two stoppers on the coin selector base toward you to unlock, and remove and replace
the coin selector.
Stopper
Stopper
4
To install, perform the procedure in reverse.
z After replacement, insert a coin and check the operation of the coin switch. (See "7-8-
z
6 (a) SWITCH TEST" on page 47.)
- Must be performed by a technician -
- Must be performed by a technician -
Coin selector base
Coin selector
8b. Service
1
2
3
4
5
6
7
8A
8B
9
10
11
12
103
16/03/22 19:54