Setting Menu - LeuchtKraft DMX-4840 Instruction Manual

5. Setting Menu

LEUCHTKRAFT
3. Move FADERS1-24 to vary the channel outputs or use Jog
wheel #1 、#2 to adjust PAN and PAN FINE or use Jog wheel #3 ,
#4 to adjust TILT、TILT FINE.
4. Once the effect is adjusted, press MANUAL/REC button to store,
at this moment, all LEDs on
FIXTURE GROUP、 PRESET、 CHASE、 BANK、 BLACKOUT flicker
at the same time.
5. Press BLACK OUT/STAND ALONE button, all LEDs flicker for 3
times to indicate that you have successfully stored a Black Scene.
6. Press PROGRAM button for 3 seconds to exit Program mode,
the LED goes out indicating this operation.
Entering the Menu
1. Enter Program mode.
2. Press ENTER/MAIN MENU Button， to enter LCD screen main
menu.
DMX-4840
CUE 、 OVERRIDE 、 CENTER 、
38