Delete A Chase - LeuchtKraft DMX-4840 Instruction Manual

4.13 Delete a CHASE

LEUCHTKRAFT
7. Press the button CHASE to store the operation and exit from the
present programming state.
8. Press the button PROGRAM for 3 seconds to exit Program mode,
the LED goes out indicating this operation.
1. Enter Program mode.
2. Press the button CHASE, use jog wheel #1 to select the page
number, choose the programming chase.
3. Press the button AUTO/DEL.
4. Press the number button 1-20 to select the chase to be deleted,
all LEDs flicker for 3 times to indicate that you have successfully
delete the chase.
5. Repeat the steps 2-4 to delete more chases.
6. Press the button PROGRAM for 3 seconds to exit Program mode,
the LED goes out indicating this operation.
DMX-4840 23