Run Program - LeuchtKraft DMX-4840 Instruction Manual

NOTE：When you press TAP/INSERT to adjust the speed, adjusting the running speed of
the scene is based on the interval of pressing the Press TAP /INSERT Button twice which
no more than 10 minutes.

6.2 Run Program

Please finish the program and scene before running the program.
1. Auto Mode
LEUCHTKRAFT
4. Use Jog wheel #3 or #4 to adjust current FADE TIME or WAIT
TIME, or use TAP/INSERT
scene.
1. Press CHASE Button, use jog wheel #1 to select chase page.
2. Press MANUAL/REC to enter manual mode, the LED of
MANUAL/REC will be on.
3. Press number Button 1-20 to select the program you anticipant..
4. Use Jog wheel #2 to run the last or next step.
DMX-4840
Button to adjust the speed of the
56