Fog Machine Operation; Strobe Light Operation - LeuchtKraft DMX-4840 Instruction Manual

7.1 Set up another 481CH DMX signal to control the fog machine(keep out the 482CH).

7.2 Fog Machine operation:

8. Strobe light operation

8.1 Set up 483~484CH address in the DMX signal to control the strobe light channel
LEUCHTKRAFT
B. When CUE or CHASE or BANK running, press OVERRIDE
button, then use 1-20 button to open the effect that be
programmed.
7. Fog Machine operation
1. Connection: connect the fog machine with the DMX information.
2. Setting: Keep the power on , hold the FOG MACHINE button the
press PROGRAM button to enter the output menu,
Use #2 or #3 or #4 to setup duration set (1-100S) or interval
set(0-200S) or volume out(0-255).
Press ENTER/MAIN MENU button to store Press PROGRAM
button to exit
3. Control: The fog machine work as it's set in normal. Press FOG
MACHINE button to output maximal fog (set 481CH output to be
255).
DMX-4840 59