Erase All Memory - LeuchtKraft DMX-4840 Instruction Manual

protect password, press ENTER/MAIN MENU button to enter.

5.15 Erase all memory

LEUCHTKRAFT
4. The LCD hint to input password, use number button 1-10 to input
6 digit password.
5. Use Jog wheel #2 to select Enable or Disable.
6. Press ENTER/MAIN MENU Button to enter, all the LEDs shake
for 3 times indicate that you have set successfully.
7. Press ESC/CLEAR Button to back to the last menu.
1. Enter Menu Mode.
2. Turn Jog wheel #1 up to when the 15. Erase all memory shown
on the monitor press ENTER/MAIN MENU button to enter.
3. The LCD hint to input 6 digit memory protect password. Input the
exact password, and Press ENTER/MAIN MENU Button to delete
the memory information. You have to input the password again
when it's wrong.
DMX-4840 52