LeuchtKraft DMX-4840 Instruction Manual page 60

8.2 Operation
MIDI function list:
MIDI Channel = 1~15
Bank1
Bank2
Bank3
Bank4
Chase
CUE
LEUCHTKRAFT
1. Connection : connect the strobe light with the DMX information
2. Setting: keep the power on, hold the STROBE button press
PROGRAM button to enter setting menu, Use jog wheel #2 to set
the strobe speed of the simulate strobe light.
Use jog wheel #3 or #4 to set the value of DIMMER (0-255) or
SPEED (0-255) that out of the strobe light.
Press ENTER/MAIN MENU button to store, press PROGRAM
button to exit.
3. Control: Press STROBE button then the controller will control the
DMX strobe light with the value of the DMX be set, and the light
strobe in the speed that be set to the simulate strobe light.
note number
00-19
20-39
40-59
60-79
80-99
100-119
120~125
126
function
Turn on or off the scene 1 ~ 20 of Bank 1
Turn on or off the scene 1 ~ 20 of Bank 2
Turn on or off the scene 1 ~ 20 of Bank 3
Turn on or off the scene 1 ~ 20 of Bank 4
Turn on or off Chase 1 ~ 20
Turn on or off CUE 1~20
No function
Blackout
DMX-4840 60