5.6 Fade mode setup
LEUCHTKRAFT
6. Press ENTER/MAIN MENU Button to enter, all the LEDs will
shake for 3 times.
7. Repeat 3-6 to reverse other channels.
8. Back to the last menu please press ESC/CLEAR button.
1. Enter Menu Mode.
2. Turn Jog wheel #1 up to when the 06. Fade mode setup is shown
on the monitor, press ENTER/MAIN MENU button to enter.
3. Turn Jog wheel #2 to select only pan/tilt or all channel.
4. Press ENTER/MAIN MENU Button to enter, all the LEDs will
shake for 3 times, then back to the last menu.
DMX-4840
45