Profile Create Notice - LeuchtKraft DMX-4840 Instruction Manual

11. PROFILE Create notice

11.1 PROFILE.CIF(as the profile cyclostyle)
The finished file should use a short name below 8 characters, All use capital letters
and suffix with CIF transitorily. (DMX-4840 controller nonsupport long file name) or the
controller can't read up the profile information.
11.2 TWIST-52.CIF is the profile of IMG Stageline TWIST-52 LED.
11.3 Enactment special code, so the controller should distill some channel
characteristic to manage.
; ARRT CODE
; D = DIMMER
; P = PAN
; PF = PAN FINE
; T = TILT
; TF = TILT FINE
; G = ALL GOBO CORRELATION CHANNLES
; C = ALL COLOR CORRELATION CHANNLES
; N = ETCAETERAS CHANNELS
11.4 The channel display message should be no more than 4 capital letters or
underline or number, and must be bracket with double quotation marks. Don't
replace by blank if shorter 4 character.
You'd better input in English mode, ensure all the input characters are DBC but not SBC
case
① "DIM"
② "DIM "
③ "dim" "DIm"
④ "DIM"
11.5 Don't change the group which contain";********"
11.6 Store the profile that you want to input to the controller under the root directory
of SD card.
LEUCHTKRAFT
;right
;wrong for the blank
;wrong for the lowercase
;wrong for the SBC double quotation marks
DMX-4840
DIMMER
PAN
PAN FINE in 16 channel mode
TILT
TILT FINE in 1 6 channel mode
transfer all gobo correlation channel
to preset gobo
transfer all color correlation channel
to preset gobo
else channels should be signed N
63