Create A New Fixture Profile - LeuchtKraft DMX-4840 Instruction Manual

5.1 Create a new Fixture Profile

LEUCHTKRAFT
1. Enter Menu Mode.
2. Turn jog wheel #1 up to when the 01.Create a new Fixture is
shown on the monitor, press ENTER/MAIN MENU Button to enter.
3. Use Jog wheel #2 and #4 to change the name of the FIXTURE.
Turn Jog wheel #2 to change the position of the cursor, and Jog
wheel #4 should be used to change the trait of the channel or
character. The amount of the letters must be below 26, it can be
include ten numbers， one "—", the length of the Fixture name should
be below 16, and it must be begin with letter.
4. Press ENTER/MAIN MENU button to change the trait of the
channel.
5. Use Jog wheel #2 and #4 to change the trait. Turn Jog wheel #2
to change the position of the cursor, and Jog wheel #4 to change
the trait of the channel or characters.
6. Press ENTER/MAIN MENU to enter
7. Use jog wheel #2 to select profile (ACME LIBRARY or OTHER
LIBRARY) you want to store the fixture profile.
DMX-4840 40