LeuchtKraft DMX-4840 Instruction Manual page 34

Note: If you press different buttons in step 3 and 9, the Override you set in step 3 will cover
the one in step 9.
LEUCHTKRAFT
5. Press the number button 1-20 to select the concerned fixtures to
be edited with Override.
6. Use FADERS1-24 and 4 Jog wheels to adjust the selected fixture
to your desired effect.
7. Press MANUAL/REC button, at this moment, all LEDs on CUE、
OVERRIDE、CENTER、FIXTURE GROUP、PRESET、CHASE、
BANK、BLACKOUT flicker at the same time.
8. Press OVERRIDE button.
9. Press the number button 1-20 to select the Override number you
chose in step 2, all LEDs flicker for 3 times to indicate that you have
successfully edited an Override effect.
10. Press PROGRAM button for 3 seconds to exit Program mode,
the LED goes out indicating this operation.
DMX-4840 34