Override Editing - LeuchtKraft DMX-4840 Instruction Manual

4.21 Override Editing

LEUCHTKRAFT
6. Press OVERRIDE button.
7. Press the number button 1-20 to select the to be stored Override
number, all LEDs flicker for 3 times to indicate that you have
successfully preset an Override effect.
8. Repeat steps 2-7 to program other Override effects.
9. Press PROGRAM button for 3 seconds to exit Program mode,
the LED goes out indicating this operation.
1. Enter Program mode.
2. Press OVERRIDE button.
3. Press number Button 1-20 to select the Override number to be
edited.
4. Press FIXTURE button.
DMX-4840 33