Modify A Fixture Profile - LeuchtKraft DMX-4840 Instruction Manual

5.2 Modify a Fixture Profile

LEUCHTKRAFT
8. Press ENTER/MAIN MENU button, all LEDs flicker for 3 times to
indicate that you have successfully edited a FIXTURE PROFILE.
9. Repeat steps 3-4 to build 50 FIXTURE PROFILE mas.
10. Back to the last menu please press ESC/CLEAR button.
1. Enter Menu Mode.
2. Turn jog wheel #1 up to when the 02.Modif a Fixture is shown on
the monitor，press ENTER/MAIN MENU Button to enter.
3. Use Jog wheel #3 to chose the bank of other manufacturers, and
Jog wheel #4 to chose the ACME's.
4. Press ENTER/MAIN MENU
5. Use Jog wheel #2 and #4 to change the name of the FIXTURE.
Turn Jog wheel #2 to change the position of the cursor, and Jog
wheel #4 should change the trait of the channel. The amount of the
letters must be below 26, it can be include ten numbers，one "—",
the length of the Fixture name should be below 16, and it must be
begin with letters.
DMX-4840
button to enter.
41