LeuchtKraft DMX-4840 Instruction Manual page 21

4. Use the Jog wheel #2 to select the position of inserted steps.
5. Press the button TAP/INSERT to insert a step following the
present position.
6. Use the Jog wheel #1 to select the Bank number of the inserted
scene.
7. Press the number button 1-20 to select the scene to be inserted.
8. Use the Jog wheel #3、#4 to adjust the CHASE FADE TIME and
WAIT TIME. If you do not make any adjustments, the system will
remember the last FADE TIME or WAIT TIME.
9. Press the button MANUAL/REC all LEDs flicker for 3 times to
indicate that you have successfully inserted a step into a chase.
10. Repeat steps 5-9, you can insert 200 scenes to each chase.
LEUCHTKRAFT
DMX-4840 21