Delete A Fixture Profile - LeuchtKraft DMX-4840 Instruction Manual

5.3 Delete a Fixture Profile

LEUCHTKRAFT
6. Press ENTER/MAIN MENU Button to change the trait of the
channel.
7. Use Jog wheel #2 and #4 to change the name of the FIXTURE.
Turn Jog wheel #2 to change the position of the cursor, and Jog
wheel #4 should change the trait of the channel
8. Repeat 3-7 to change other FIXTURE PROFILE.
9. Back to the last menu please press ESC/CLEAR button.
1. Enter Menu Mode.
2. Turn jog wheel #1 up to when the 03.Delete a Fixture is shown
on the monitor press ENTER/MAIN MENU Button to enter.
3. Use Jog wheel #3 to delete the profile of other manufacturers,
and Jog wheel #4 to delete the ACME's.
4. Press ENTER/MAIN MENU Button to enter and LCD will show
"NO".
DMX-4840 42