Copy A Scene - LeuchtKraft DMX-4840 Instruction Manual

Hints: If you select different scenes at step 3 and 6, the editing scene would cover the
scene at step 6.

4.5 Copy a Scene

LEUCHTKRAFT
6. Press the button BANK.
7. Press the number button 1-20 to store the edited scene which will
cover the former scenes, all LEDs and the Segment Display will
flicker for three times briefly indicating this operation, then the LCD
will show the bank and the scene number of the programmed
scene.
8. Press the button PROGRAM for three second, to exit Program
mode, the LED goes out indicating this selection.
1. Enter Program mode.
2. Press the button BANK, to turn on its fader control, which is
indicated by the lit LED.，use Jog wheel #1 to select the bank
number to edit the scene.
3. Press the number button 1-20 to open the scene you are going to
copy.
DMX-4840 13