Blackout Mode Select; Midi Channel Select - LeuchtKraft DMX-4840 Instruction Manual

5.7 Blackout mode select

5.8 Midi channel select

LEUCHTKRAFT
1. Enter Menu Mode.
2. Turn Jog wheel #1 up to when the 07. Blackout mode select is
shown on the monitor press ENTER/MAIN MENU button to enter.
3. Turn Jog wheel #2 to chose Stand by or Pan/tilt by center or
Blackout scene.
4. Press ENTER/MAIN MENU Button to enter, all the LEDs will
shake for 3 times, then back to the last menu.
1. Enter Menu Mode.
2. Use Jog wheel #1 up to when the 08.Midi channel select is
shown on the monitor Press ENTER/MAINMENU Button to enter.
3. Use Jog wheel #2 to chose the channel of MIDI（0-16）, it's
enlarge mode when the value of the MIDI channel is 0, so MIDI can
receive the information of 1-16 channels.
4. Press ENTER/MAIN MENU Button to enter, all the LEDs will
shake for 3 times, then back to the last menu.
DMX-4840 46