LeuchtKraft DMX-4840 Instruction Manual page 17

1. Enter Program mode.
2. Press the button CHASE, LEDs on CHASE will be all lit. Use jog
wheel #1 to select the page number of the chase.
3. Press the number button 1-20 to select the chase number, the
LEDs on BANK button will be all lit, the LCD will show the number
and parameter of CHASE、BANK、SCENE、STEP、FADE、WAIT.
4. Use the Jog wheel #1 to transfer to other Banks, then press the
number button 1-20 to select the scene to store the Chase.
5. Use the Jog wheel #3 to adjust the FADE TIME of present
chase, the Jog wheel #4 to adjust the WAIT TIME of the present
chase. If you do not make any adjustments, the system will
remember the last FADE TIME or WAIT TIME.
6. Press the button MANUAL/REC, all the LEDs will flicker for three
times briefly indicating the store succeed.
7. Repeat Step 4-6, each chase can have 200 scenes max.
8. Press the button PROGRAM for three seconds to exit Program
mode, the LED goes out indicating this selection.
LEUCHTKRAFT
DMX-4840 17