Chase Run By Inside/Outside Time; Auto Remote Address - LeuchtKraft DMX-4840 Instruction Manual

5.9 Chase run by inside/outside time

5.10 Auto remote address

This function is used only for the fixtures which can be addressed long-distance, ensure the
unit match this requirements before operation, or it will be of no effect .
LEUCHTKRAFT
1. Enter Menu Mode.
2. Turn jog wheel #1 up to when the 09.Chase run by inside/outside
time is shown on the monitor, Press ENTER/MAINMENU Button to
enter
3. Use Jog wheel #2 to chose Chase run by inside time or Chase
run by outside time
4. Press ENTER/MAIN MENU Button to enter, all the LEDs will
shake for 3 times, then back to the last menu.
1. Enter Menu Mode.
2. Turn Jog wheel #1 up to when the 10. Auto remote address is
shown on the monitor Press ENTER/MAIN MENU Button to enter
3. Use Jog wheel #2
menu) .
DMX-4840
to select Yes (enter) or NO (quit to the main
47