Program A Chase - LeuchtKraft DMX-4840 Instruction Manual

4.8 Program a Chase

Note: The chase should be programmed after the scene is set. Each chase can have 200
scenes max.
LEUCHTKRAFT
3. Use the Jog wheel #1 to select the Bank number of the being
copied scene.
4. Press the button MANUAL/REC，LEDs on CUE、OVERRIDE、
CENTER 、 FIXTURE GROUP 、 PRESET 、 CHASE 、 BANK 、
BLACKOUT flicker at the same time.
5. Then turn the Jog wheel #1 to select the bank number to copy to.
6. Press the button MUSIC/BANK COPY, all LEDs and the
Segment Display will flicker for three times briefly indicating this
operation, then the LCD will show the number of the being copied
bank and the bank is being copied to and the scene number of the
programmed scene.
7. Press the button PROGRAM for three seconds to exit Program
mode, the LED goes out indicating this selection
DMX-4840 16