Program All The Scenes In A Bank - LeuchtKraft DMX-4840 Instruction Manual

4.9 Program all the Scenes in a Bank

LEUCHTKRAFT
1. Enter Program mode.
2. Press the button CHASE use jog wheel #1 to select the page
number, choose the programming chase.
3. Press the number button 1-20 to select the Chase number, LEDs
on the BANK button will be all lit, the LCD will show the number
and parameter of the CHASE、BANK、SCENE、STEP、FADE、
WAIT.
4. Use the Jog wheel #1 to select the Bank number of the
programmed Chase.
5. Use the Jog wheel #3、#4 to adjust the FADE TIME and WAIT
TIME which are going to be added to the single Chase. If you do not
make any adjustments, the system will remember the last FADE
TIME or WAIT TIME.
6. Press the button MUSIC/BANKCOPY
7. Press the button MANUAL/REC, all LEDs flicker for 3 times, all
the programmed scenes in the Bank will join the Chase.
8. Repeat Step 3-7 can join 200 scenes max to the chase.
DMX-4840 18