Center Editing - LeuchtKraft DMX-4840 Instruction Manual

4.19 Center Editing

LEUCHTKRAFT
5. Press MANUAL/REC button, at this moment, all LEDs on CUE、
OVERRIDE、CENTER、FIXTURE GROUP、PRESET、CHASE、
BANK、BLACKOUT flicker at the same time.
6. Press CENTER button.
7. Press the number button 1-20 to select the location to store the
Center all LEDs flicker for 3 times to indicate that you have
successfully stored a Center position.
8. Repeat steps 2-7to program more Center positions.
9. Press PROGRAM button for 3 seconds to exit Program mode,
the LED goes out indicating this operation.
1. Enter Program mode.
2. Press CENTER button.
3. Press the number button1-20 to select the edited Center position
number.
DMX-4840 30