Modify Password; Enable Password - LeuchtKraft DMX-4840 Instruction Manual

5.13 Modify Password

LEUCHTKRAFT
7. Press ESC/CLEAR Button to back to the last menu, 2 times to
back to the main menu.
1. Enter Menu Mode.
2. Turn Jog wheel #1 up to when the 13. Modify Passwords shown
on the monitor press ENTER/MAIN MENU button to enter.
3. Use Jog wheel #1 to select power on password or memory
protect password, Press ENTER/MAIN MENU Button to enter.
4. Use number Button 1-10 to input 6 digit old password(10 equal
to number 0) ，if the password is wrong , it will hint to input
continually.
5. It will hint to input new 6 digit password after get exact password.
You have to input the same password twice, it will back to the last
menu automatically after change the password successfully.
6. Use Jog wheel #2 to select Power on password or memory
protect password.
7. Press ESC/CLEAR Button to back to the last menu, and again to
the main menu.

5.14 Enable Password

1. Enter Menu Mode.
2. Turn Jog wheel #1 up to when the 14. Enable password shown
on the monitor press ENTER/MAINMENU button to enter.
3. Use Jog wheel #1 to select use power password or use memory
DMX-4840 51