Read Sd Card - LeuchtKraft DMX-4840 Instruction Manual

5.11 Read SD card

If you have stored program files (???????.PRO）or bank files (????????.CIF) in the
directory of DIR2420 which under the root directory of SD card, then you can read them out
by this function. And you have to patch the profile in order to use it normally. Every time read
the SD card, please don't move it, or the card or the files will be damaged. The format of
the SD card should be FAT, else you have to convert it to FAT by PC, and copy it to SD
card.
LEUCHTKRAFT
4. Press ENTER/MAIN MENU Button to set the address of the
fixture, wait for 3 seconds, so
the controller and move all the motors to their "home" position.
5. After 3 seconds, use jog wheel #2 to select the fixtures of the
first group, and jog wheel #4
group. When you turn the jog wheel #2 or #4, the cursor will switch
between the first and second group. The fixtures of this two group
will be selected in turn, and the unit will act differently when it be
selected.
6. Press number Button 1-20，all the LEDs will shake 3 times, the
address of the corresponding fixture will show on the LCD display,
it means the fixture's amount of the channel is as same as the
corresponding number button's.
7. Repeat 5-6 to set the address of other fixtures.
8. Back to the last menu, please press ESC/CLEAR Button.
DMX-4840
the fixture can receive the signal of
to select the fixtures of the second
48