Reverse Channel Setup - LeuchtKraft DMX-4840 Instruction Manual

5.5 Reverse channel setup

LEUCHTKRAFT
5. Press ENTER/MAIN MENU Button to enter, all the LEDs strobe
for 3 times.
6. Repeat 3-5 to patch all the fixtures.
7. Back to the last menu please press ESC/CLEAR button.
1. Enter Menu Mode.
2. Turn Jog wheel #1 up to when the 05. Reverse channel setup is
shown on the monitor press ENTER/MAIN MENU Button to enter.
3. Press number Button 1-20 to chose the fixture which needs to
reverse.
4. Turn Jog wheel #2 to change the position of the cursor, and Jog
wheel #4 used to reverse the channel.
5. Turn Jog wheel #3 to chose the channel, Jog wheel #4 to
reverse.
DMX-4840 44