Cue Editing - LeuchtKraft DMX-4840 Instruction Manual

4.23 CUE Editing

LEUCHTKRAFT
1. Enter Program mode.
2. Press CUE button, use jog wheel #1 to select the page number.
3. Press the number button 1-20，to select the to be edited CUE
number, at this moment, all LEDs on CHASE are lit and all LEDs on
the number button which have saved CHASE will flicker. Turn jog
wheel #1 should change the page number.
4. Press the number button to edit the Chase in CUE.
5. Press MANUAL/REC button, all LEDs flicker for 3 times to
indicate that you have successfully edited a CUE.
6. Press PROGRAM button for 3 seconds to exit Program mode,
the LED goes out indicating this operation.
DMX-4840 36