Program A Fixture Group - LeuchtKraft DMX-4840 Instruction Manual

4.16 Program a Fixture Group

LEUCHTKRAFT
1. Enter Program mode.
2. Press FIXTURE button.
3. Press the number button1-20 to select one or more fixtures to
make the fixture group.
4. Press MANUAL/REC button，at this moment, all LEDs on CUE、
OVERRIDE、CENTER、FIXTURE GROUP、PRESET、CHASE、
BANK、BLACKOUT flicker at the same time.
5. Press FIXTURE GROUP button.
6. Press the number button 1-20 to select the number of the fixture
group for store, all LEDs flicker for 3 times
7. Repeat steps 2-6 to edit more fixture groups.
8. Press PROGRAM button 3 seconds to exit Program mode, the
LED goes out indicating this operation.
DMX-4840 27