Preset Editing - LeuchtKraft DMX-4840 Instruction Manual

4.15 Preset Editing

LEUCHTKRAFT
8. Press one of the number button 1-10 to store a COLOR preset
or Pres one of the number button 11-20 to store a GOBO preset, all
LEDs flicker for 3 times to indicate that you have successfully store
a Preset.
9. Repeat Steps 2-8 to program more Presets.
10. Press the button PROGRAM for 3 seconds to exit Program
mode, the LED goes out indicating this operation.
1. Enter Program mode.
2. Press PRESET Button to select programming Preset state.
3. Roll the Jog wheel #1 to select Preset groups 1-20.
4. Press the number button 1-20 to open the to be edited Preset.
5. Press FIXTURE button.
DMX-4840 25