Program An Override - LeuchtKraft DMX-4840 Instruction Manual

NOTE: If you press different buttons in step 3 and 9, the center position you set in step 3 will
cover the one in step 9.

4.20 Program an Override

LEUCHTKRAFT
10. Press PROGRAM button for 3 seconds to exit Program mode,
the LED goes out indicating this operation.
1. Enter Program mode.
2. Press FIXTURE button.
3. Press the number button 1-20 to select the concerned fixtures to
be programmed.
4. Use FADERS1-24 and 4 Jog wheels to adjust the selected fixture
to your desired effect.
5. Press MANUAL/REC Button，at this moment, all LEDs on CUE、
OVERRIDE、CENTER、FIXTURE GROUP、PRESET、CHASE、
BANK、BLACKOUT flicker at the same time.
DMX-4840 32