Delete Steps From Program - LeuchtKraft DMX-4840 Instruction Manual

4.12 Delete Steps from Program

LEUCHTKRAFT
11. Press the button CHASE to store the chase and exit the chase
programming state.
12. Press the button PROGRAM for 3 seconds to exit Program
mode, the LED goes out indicating this operation.
1. Enter Program mode.
2. Press the button CHASE use jog wheel #1 to select the page
number, choose the programming chase.
3. Press the number button 1-20 to select the chase number to
delete from.
4. Use Jog wheel #2 to select the scene location you want
to delete.
5. Press AUTO/DEL all LEDs flicker for 3 times to indicate that you
have successfully deleted the scene.
6. Repeat steps 4-5to delete more scenes from the chase.
DMX-4840 22