Super Password; Update The Software With Sd Card - LeuchtKraft DMX-4840 Instruction Manual

9. Super Password

Password type
Power on password
Memory protect password

10. Update the software with SD card

please don't move the SD card or cut the power in order to avoid update frustrated and
damage the SD card.
Save the program first, or updating the software may lead the memory program useless.
Please refer to "Write SD card" and "Read SD card" to operate.
NOTICE：The format of the SD card should be FAD12 or FAD16, but not FAD32 and
NTFS, be sure there is no long-name files under the root directory (the amount of the
name below 8), the character must be start with letters, and compose with letters or
number or underline.
LEUCHTKRAFT
Power off, and Press Enter/main manual and
numberButton1 at the same time， Power on afresh, input the
super password (888888) as the LCD indicate, then the power
password and memory password changed into "111111" and
password protect state become DISABLE
Default
password
111111
111111
Format the program of the controller , then download the last
software and copy to SD： \SUP2420\APP2420.SUP， inset the SD
card to the seat, press FIXTURE and OVERRIDE and number
button 15 then Power on afresh until the information show on the
LCD display, the controller will test if the SD card stick well and
then update the new software, it will cost about 20 seconds,
DMX-4840
password protect state
Disable
Disable
Auto/Del and
62