4.22 Program a CUE
LEUCHTKRAFT
1. Enter Program mode.
2. Press CUE button use jog wheel #1 to select the page number.
3. Press the number button 1-20 to select the to be stored CUE
number, at this moment, all LEDs on CHASE are lit and all LEDs on
the number button which have saved CHASE will flicker. Turn jog
wheel #1 should change the page number.
4. Press the number button 1-20 to select the Chase number which
is to be stored to CUE, the LEDs on the chosen number buttons will
be lit.
5. Press MANUAL/REC button, all LEDs flicker for 3 times to
indicate that you have successfully stored a CUE.
6. Repeat steps 4-6 to store more CUEs.
7. Press PROGRAM button for 3 seconds to exit Program mode,
the LED goes out indicating this operation.
DMX-4840
35