LeuchtKraft DMX-4840 Instruction Manual page 49

NOTE: Please backup the programs before you load program file, or the program file you
load will replace all the program in the controller. The controller should store finite bank files,
LEUCHTKRAFT
1. Enter Menu Mode.
2. Turn Jog wheel #1 up to when the 11. Read SD card is shown on
the monitor Press ENTER/MAIN MENU Button to enter.
3. Use Jog wheel #1 to read the program file 01. Load program file
or profile file 02. Load a fixture profile. Press ENTER/MAIN MENU
Button to enter.
4. The list of the program/profile files will show on the LCD, turn jog
wheel #1 to select the file name. The amount of the files consider to
the amount of the program or profile files which you saved under the
directory of DIR2420 in the SD card.
5. Use Jog wheel #2 to select Yes/no。
6. Press ENTER/MAIN MENU Button to enter.
7. After read up the file, the LCD will hint to complete. Repeat 3-7 to
read up other files.
8. Back to the last menu, please press ESC/CLEAR Button.
9. Press ESC/CLEAR Button 2 times to back to the main menu or 3
times to exit the menu.
DMX-4840 49