Program A Preset - LeuchtKraft DMX-4840 Instruction Manual

4.14 Program a Preset

LEUCHTKRAFT
1. Enter Program mode.
2. Press the button FIXTURE
3. Press the button 1-20 to select the concerned fixture of preset
programming.
4. Move the FADERS1-24 to change COLOR/GOBO channel
values (The codes of the channel feature of ARRT CODE are "C"
and "G" in the fixtures bank)output for the convenience to check
other channels but the channel output will not be stored in the
preset.
5. Press the button MANUAL/REC at this moment all LEDs on
buttons CUE 、 OVERRIDE 、 CENTER 、 FIXTURE GROUP 、
PRESET、CHASE、BANK、BLACKOUT flicker at the same time.
6. Press the button PRESET
7. Use Jog wheel #1 to select the preset group number 1-20.
DMX-4840 24