LeuchtKraft DMX-4840 Instruction Manual page 26

NOTE: If you press different buttons in step 4 and 10, the preset in step 4 will cover the one
in step 10.
LEUCHTKRAFT
6. Press the number button1-20 to select the concerned fixtures to
program Preset.
7. Move FADER 1-24 to change COLOR/GOBO channel values
（The codes of the channel feature of ARRT CODE are "C" and "G"
in the fixtures bank）output for the convenience to check other
channels but the channel output will not be stored in the preset.
8. Press MANUAL/REC button , at this moment, all LEDs on CUE、
OVERRIDE、CENTER、FIXTURE GROUP、PRESET、CHASE、
BANK、BLACKOUT flicker at the same time.
9. Press PRESET Button。
10. Press number button 1-20 to select the opened Preset， all LEDs
flicker for 3 times to indicate that you have successfully edited the
Preset.
11. Press PROGRAM button for 3 seconds to exit Program mode,
the LED goes out indicating this operation.
DMX-4840 26