Components Of The Parameter Unit; Parameter Unit (Fr-Pu07) / Parameter Unit With Battery Pack (Fr-Pu07Bb(-L)) - Mitsubishi Electric FR-XC-18.5K-PWM Instruction Manual

Parameter unit (FR-PU07) / Parameter unit with battery pack (FR-PU07BB(-L))

3.3
Parameter unit (FR-PU07) / Parameter unit
with battery pack (FR-PU07BB(-L))
Installing the optional parameter unit (FR-PU07) / parameter unit with battery pack (FR-PU07BB(-L)
regeneration converter allows to set the converter parameters and monitor the converter status. However, the available
functions in the parameter unit installed on the converter are limited compared to those in the parameter unit installed on the
inverter.
∗1
Batteries are not included in FR-PU07BB-L.
3.3.1

Components of the parameter unit

POWER lamp
ON when the power is turned ON.
I In
10.0
A
STF FWD PU
FR-PU07
Key
Used for parameter setting.
Press this key to select the parameter setting mode.
Used to display the first priority monitoring screen.
The first priority monitoring screen is initially set to the input current monitoring screen.
Used to cancel the operation.
Used to display the function menu.
A variety of functions can be used from the function menu.
Used to shift to the next item in the setting or monitoring mode.
Used to enter a parameter number or set value.
to
Used to clear the PU stop warning ("
the PU stop function).
Not available for the FR-XC(-PWM) converter.
• Press either of these keys on the parameter setting mode screen to change the parameter setting value sequentially.
• On the selecting screen, these keys are used to move the cursor.
/
• Hold down
Not available for the FR-XC(-PWM) converter.
Not available for the FR-XC(-PWM) converter.
• Stop command key.
• Used to reset the converter when a fault occurs.
• Used to write a set value in the setting mode.
• Used as a clear command key for All parameter clear or the alarm clear (resetting the fault history).
• Used to enter a decimal point when entering numerical value.
• Used as a parameter number read key in the parameter setting mode.
• Used as an item select key on the menu screen such as parameter list or monitoring list.
• Used to show the details of each fault in the alarm (fault) history mode.
NOTE
• Do not operate the keys with sharp tools.
• Do not press the LCD part.
80
PARAMETERS
Monitor
● Liquid crystal display
(16 characters × 4 lines, with backlight)
● Monitoring (current, voltage, etc.)
ALARM lamp
ON when a converter fault
occurs.
Operation keys
" indication on the converter) when the converter is stopped by pressing
and press either of these keys to advance or return the display screen one page.
POWER lamp
ON when the power is turned ON.
I In
10.0
Monitor
A
STF FWD PU
● Liquid crystal display
(16 characters × 4 lines, with backlight)
● Monitoring (current, voltage, etc.)
Operation keys
FR-PU07BB （-L）
Description
) on the multifunction
∗1
Battery indicator
The lamp color turns to
orange from green when the
battery is low.
ALARM lamp
ON when a converter
fault occurs.
(by