Download  Print this page

Pu Installation On Converter - Mitsubishi Electric FR-XC-18.5K-PWM Instruction Manual

Fr-xc series multifunction regeneration converter
Hide thumbs

Advertisement

Table of Contents

PU installation on converter

2.11
PU installation on converter
• When the PU (inverter operation panel or optional parameter unit) is installed on the multifunction regeneration converter,
the setting of converter parameters is possible by using the PU.
Use the option FR-CB2[ ] or the following connector and cable available on the market.
(To install the operation panel, the optional connector (FR-ADP) is also required.)
Securely insert one end of connection cable into the PU connector on the converter and the other end into the connection
connector on the parameter unit or the FR-ADP attached on the operation panel along the guides until the stoppers are
fixed.
Parameter Unit
(FR-PU07) (option)
NOTE
• Refer to the following table when fabricating the cable on the user side. Keep the total cable length within 20 m.
Commercially available products (as of February 2015)
Name
Communication cable
RJ-45 connector
70
INSTALLATION AND WIRING
Parameter unit connection cable
(FR-CB2[ ]) (option)
Operation panel of
the inverter (FR-DU08)
Operation panel connection
connector (FR-ADP) (option)
Model
SGLPEV-T (Cat5e/300 m)
24AWG × 4P
5-554720-3
Manufacturer
Mitsubishi Cable Industries, Ltd.
Tyco Electronics

Advertisement

Table of Contents
loading

  Related Manuals for Mitsubishi Electric FR-XC-18.5K-PWM