Download  Print this page

Appendix 3 Instructions For Compliance With The Eu Directives - Mitsubishi Electric FR-XC-18.5K-PWM Instruction Manual

Fr-xc series multifunction regeneration converter
Hide thumbs

Advertisement

Table of Contents
Appendix 3
The EU Directives are issued to standardize different national regulations of the EU Member States and to facilitate free
movement of the equipment, whose safety is ensured, in the EU territory.
Since 1996, compliance with the EMC Directive that is one of the EU Directives has been legally required. Since 1997,
compliance with the Low Voltage Directive, another EU Directive, has been also legally required. When a manufacturer
confirms its equipment to be compliant with the EMC Directive and the Low Voltage Directive, the manufacturer must declare
the conformity and affix the CE marking.
• The authorized representative in the EU
The authorized representative in the EU is shown below.
Name: Mitsubishi Electric Europe B.V.
Address: Mitsubishi-Electric-Platz 1, 40882 Ratingen, Germany
• Note
We declare that this multifunction regeneration converter, when equipped with the dedicated EMC filter, conforms with the
EMC Directive in industrial environments and affix the CE marking on the converter. When using the converter in a
residential area, take appropriate measures and ensure the conformity of the converter used in the residential area.
EMC Directive
We declare that this converter, when equipped with the EMC Directive compliant EMC filter, conforms with the EMC
Directive and affix the CE marking on the converter.
• EMC Directive: 2014/30/EU
• Standard(s): EN 61800-3:2004+A1:2012 (Second environment / PDS Category "C3")
Note: First environment
Environment including buildings/facilities which are directly connected to a low voltage main supply which also supplies
residential buildings.
Directly connected means that there is no intermediate transformer between these buildings.
Second environment
Environment including all buildings/facilities which are not directly connected to a low voltage main supply which also supplies
residential buildings.
 Note
• Set the EMC Directive compliant EMC filter to the converter. Use a recommended EMC compliant EMC filter shown in the
table below. Insert line noise filters and ferrite cores to the power and control cables as required.
• EMC Directive compliant noise filter
200 V class
(Manufacture by: SOSHIN ELECTRIC CO., LTD.)
Multifunction regeneration
converter
EMC Directive compliant
noise filter
(Manufacture by: COSEL CO., LTD.)
Multifunction regeneration
converter
EMC Directive compliant
noise filter
176
APPENDIX
Instructions for compliance with
the EU Directives
FR-XC-7.5K
HF3040C-UQC
HF3060C-UQC
FR-XC-18.5K-PWM
FR-XC-15K
FR-XC-22K-PWM
Harmonic suppression
Disabled
FTB-80-663-L
FR-XC-11K
FR-XC-22K
FR-XC-30K
Enabled
FTB-150-663-L
FR-XC-37K
FR-XC-55K
FR-XC-37K-PWM
FR-XC-55K-PWM
Harmonic suppression
Disabled
Enabled
TBC-300-104

Advertisement

Table of Contents
loading

  Related Manuals for Mitsubishi Electric FR-XC-18.5K-PWM